Xian Junbiao Electronics Technology Co.,Ltd.
RELIABLE & SECURE POWER SOLUTIONS
Add to Cart
SM5000 Solar Charge Controller and Inverter MPPT Charge Controller DSP Wide Range
JET-SM 5000 solar inverter with MPPT charge controller
JET-SM 5000 solar inverter with MPPT charge controller, is combined with solar charging and AC output in one unit, which adopts a multi-core processor design and advanced MPPT control algorithm to realize intelligent management. The device is used in remote area where is lack of reliable utility but rich of sun shine.
The PV charging module adopts the MPPT tracking technology, it can quickly track the maximum power point of the PV array in any environment even has the multi crest tracking ability. The MPPT tracking speed and energy transfer efficiency is quite high. The PV and AC charge current can be adjusted manually, which can meet total charge current limit function, and PV & utility charge current ratio distribution. Full electronic protection functions are available.
The AC-DC charging module adopts the advanced MPPT control algorithm, realize fully digitalized double closed-loop control for voltage and current, with high reliability and response speed. With wide AC input voltage range and charge current limitation volume can be set. This module has complete protection functions at input and output.
The DC-AC inverter module is based on full digital and intelligent design, outputs the pure sine wave and converts 24/48VDC to 220/230VAC, which is suitable for AC loads of household appliances, electric tools, commercial units, electronic audio and video devices etc.
With utility bypass charging function, the utility module can provide power supply to loads directly, and charge the battery simultaneously. Under utility charge status, user can choose bypass mode or inverter output mode. This characteristic is preferred in the area where the utility is not stable, user should choose inverter output mode to get stable output voltage to avoid the appliance damaged because of bad condition utility.
Specification
| Model | SM 1000 | SM 2000 | SM 3000 | SM 4000 | SM 5000 | SM 6000 |
| Rated Power | 1KW | 2KW | 3KW | 4KW | 5KW | 6KW |
| Peak Power | 3KW | 6KW | 9KW | 12KW | 15KW | 18KW |
| Input Battery Voltage | 12/24/48VDC | 24/48/96VDC | ||||
| Input Grid Voltage | 170-265VAC | |||||
| Input Grid Frequency | 45-65Hz (Auto Sensing) | |||||
| Output Efficiency | >90% | |||||
| Output Voltage | 220VAC ±3% (Battery Mode) | |||||
| Output Frequency | 50/60HZ ±0.3Hz (Battery Mode) | |||||
| Output Waveform | Pure Sinewave | |||||
| Grid Charge Current | 0-35A (Optional) (96V max 15A) | |||||
| MPPT | ||||||
| Charge & Discharge Current | 30A/50A | 50A | ||||
| Max PV Input Voltage | Max 50V for 12V, 100V for 24, 150V for 48V | |||||
| Max PV Array Power | 600W (12V) / 1200W (24V) | 1200W (24V) / 2400W (48V) | ||||
| Other Specification | ||||||
| Protection | Short-Circuit, Overvoltage, Low Voltage, Over Temperature, Overload, Reverse | |||||
| Overload Capacity | 110-120% of output maintained for 30 seconds, then turned to bypass. 160% maintained for 300ms. | |||||
| Conversion Mode | Online Interactive | |||||
| Communication Port | RS485 | |||||
| Relative Humidity | 10-90% Non-condensate | |||||
| Operating Temperature | -20℃~ +75℃ | |||||
| Dimensions (mm) | 475x300x185 | 650x300x185 | ||||
| Net Weight (kgs) | 14.7 | 17.5 | 19 | 30 | 32 | 34 |
Service
1, Support imprint your logo on products and let your logo shine anywhere
2, We own the best after-sale service. If any problem happens, our team will do our best to solve it.
3, Aluminum box and carton box, careful and tight package, make sure the package is intact during delivery.
4, The package will be shipped by DHL/FedEx/TNT/EMS/UPS/Special line, which can be specified in the order.
5, The shipping time is different, it depends on the distance between us, and the quantity ordered.